From cfc2fb21f4f92c57b0cc32b3caa239e704e3ae82 Mon Sep 17 00:00:00 2001
From: Felix Schlepper <felix.schlepper@cern.ch>
Date: Thu, 16 Apr 2026 17:51:40 +0200
Subject: [PATCH] ITS: move all pp settings to dpl-workflow.sh

Signed-off-by: Felix Schlepper <felix.schlepper@cern.ch>
---
 .../ITS/tracking/include/ITStracking/TrackingConfigParam.h  | 6 +++---
 prodtests/full-system-test/dpl-workflow.sh                  | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Detectors/ITSMFT/ITS/tracking/include/ITStracking/TrackingConfigParam.h b/Detectors/ITSMFT/ITS/tracking/include/ITStracking/TrackingConfigParam.h
index cb291b46f5e44..5ffd55f715a1a 100644
--- a/Detectors/ITSMFT/ITS/tracking/include/ITStracking/TrackingConfigParam.h
+++ b/Detectors/ITSMFT/ITS/tracking/include/ITStracking/TrackingConfigParam.h
@@ -25,9 +25,9 @@ struct VertexerParamConfig : public o2::conf::ConfigurableParamHelper<VertexerPa
   int nIterations = 1;         // Number of vertexing passes to perform.
   int vertPerRofThreshold = 0; // Maximum number of vertices per ROF to trigger second a iteration.
 
-  // geometrical cuts for tracklet selection
+  // geometrical cuts for tracklet selection for Pb-Pb
   float zCut = 0.002f;
-  float phiCut = 0.4f;
+  float phiCut = 0.005f;
   float pairCut = 0.0211211f;
   float clusterCut = 0.4275412f;
   float coarseZWindow = 0.6521316f;
@@ -36,7 +36,7 @@ struct VertexerParamConfig : public o2::conf::ConfigurableParamHelper<VertexerPa
   float duplicateZCut = 0.7985643f;
   float finalSelectionZCut = 0.2932624f;
   float duplicateDistance2Cut = 0.0223001f;
-  float tanLambdaCut = 0.17f;         // tanLambda = deltaZ/deltaR
+  float tanLambdaCut = 0.002f;        // tanLambda = deltaZ/deltaR
   float vertNsigmaCut = 5.8762583f;   // N sigma cut for vertex XY
   float vertRadiusSigma = 0.0343575f; // sigma of vertex XY
   float trackletSigma = 0.0143798f;   // tracklet to vertex sigma
diff --git a/prodtests/full-system-test/dpl-workflow.sh b/prodtests/full-system-test/dpl-workflow.sh
index d54c05ff0f20e..e954f6875eb30 100755
--- a/prodtests/full-system-test/dpl-workflow.sh
+++ b/prodtests/full-system-test/dpl-workflow.sh
@@ -119,7 +119,7 @@ EVE_OPT=" --jsons-folder $EDJSONS_DIR"
 
 # ITS vertexing settings
 if [[ $BEAMTYPE == "pp" || $LIGHTNUCLEI == "1" ]]; then
-  ITS_CONFIG_KEY+=";ITSVertexerParam.pairCut=0.0317563;ITSVertexerParam.clusterCut=0.6640964;ITSVertexerParam.coarseZWindow=0.2049018;ITSVertexerParam.seedDedupZCut=0.0711793;ITSVertexerParam.refitDedupZCut=0.0680009;ITSVertexerParam.duplicateZCut=0.1582193;ITSVertexerParam.finalSelectionZCut=0.1081465;ITSVertexerParam.duplicateDistance2Cut=0.0117033;ITSVertexerParam.clusterContributorsCut=2;ITSVertexerParam.seedMemberRadiusZ=0;ITSVertexerParam.vertNsigmaCut=4.0;ITSVertexerParam.vertRadiusSigma=0.0452309;ITSVertexerParam.trackletSigma=0.0025941;ITSVertexerParam.suppressLowMultDebris=0;"
+  ITS_CONFIG_KEY+="ITSVertexerParam.phiCut=0.4;ITSVertexerParam.tanLambdaCut=0.17;ITSVertexerParam.pairCut=0.0317563;ITSVertexerParam.clusterCut=0.6640964;ITSVertexerParam.coarseZWindow=0.2049018;ITSVertexerParam.seedDedupZCut=0.0711793;ITSVertexerParam.refitDedupZCut=0.0680009;ITSVertexerParam.duplicateZCut=0.1582193;ITSVertexerParam.finalSelectionZCut=0.1081465;ITSVertexerParam.duplicateDistance2Cut=0.0117033;ITSVertexerParam.clusterContributorsCut=2;ITSVertexerParam.seedMemberRadiusZ=0;ITSVertexerParam.vertNsigmaCut=4.0;ITSVertexerParam.vertRadiusSigma=0.0452309;ITSVertexerParam.trackletSigma=0.0025941;ITSVertexerParam.suppressLowMultDebris=0;"
 fi
 
 if [[ $CTFINPUT != 1 ]]; then