dig-protocol

DIG Network L2 protocol types — superset of chia-protocol with extension opcodes 200–219.

One dependency replaces five: chia-protocol, chia-sdk-client, chia-ssl, chia-traits, chia_streamable_macro — all re-exported verbatim.

---

Install

[dependencies]
dig-protocol = { version = "0.1", features = ["rustls"] }

Features

Flag	Forwards to	Adds re-exports
native-tls	chia-sdk-client/native-tls	Client, ClientState, Connector, create_native_tls_connector
rustls	chia-sdk-client/rustls	Client, ClientState, Connector, create_rustls_connector

Neither default. Without a TLS feature: DIG types and Peer still compile; Client does not.

---

Why this crate exists

chia_protocol::Message stores msg_type as ProtocolMessageTypes — a closed #[repr(u8)] enum covering opcodes 0–107. Message::from_bytes rejects any unknown opcode. DIG extension opcodes (200+) cannot decode through stock Message.

DigMessage has identical wire layout but stores msg_type as raw u8. Encodes/decodes any opcode (Chia or DIG) without touching upstream types. Conversions to/from Message are lossless for opcodes the Chia enum recognizes.

---

Wire format

DigMessage binary layout (same as chia_protocol::Message):

[u8 msg_type] [u8 has_id (0|1)] [u16 id (big-endian, if has_id==1)] [u32 data_len (BE)] [u8; data_len payload]

• msg_type < 200 → Chia standard opcode
• msg_type ≥ 200 → DIG extension opcode (see DigMessageType)

---

Opcode assignments

DIG band: 200..=219. Chia band: 0..=107 (+ reserves). Gap 108..=199 reserved for future Chia.

Opcode	Variant	Payload	Gossip strategy
200	NewAttestation	—	Plumtree eager push
201	NewCheckpointProposal	—	Plumtree eager push
202	NewCheckpointSignature	—	Plumtree eager push
203	RequestCheckpointSignatures	—	Unicast request
204	RespondCheckpointSignatures	—	Unicast response
205	RequestStatus	—	Unicast request
206	RespondStatus	—	Unicast response
207	NewCheckpointSubmission	—	Plumtree eager push
208	ValidatorAnnounce	—	Broadcast flood
209	RequestBlockTransactions	—	Unicast request
210	RespondBlockTransactions	—	Unicast response
211	ReconciliationSketch	—	ERLAY reconciliation
212	ReconciliationResponse	—	ERLAY reconciliation
213	StemTransaction	—	Dandelion++ stem
214	PlumtreeLazyAnnounce	—	Plumtree lazy
215	PlumtreePrune	—	Plumtree control
216	PlumtreeGraft	—	Plumtree control
217	PlumtreeRequestByHash	—	Plumtree pull
218	RegisterPeer	RegisterPeer struct	Unicast → introducer
219	RegisterAck	RegisterAck struct	Unicast ← introducer

Payload types for 200–217 are TBD (defined by consumer crates); the protocol crate only defines discriminants + framing.

---

Public interface — DIG types

DigMessage — raw-opcode wire message

pub struct DigMessage {
    pub msg_type: u8,         // 0..=255, any opcode
    pub id: Option<u16>,      // correlation id for req/resp
    pub data: Bytes,          // serialized payload
}

impl DigMessage {
    pub fn new(msg_type: u8, id: Option<u16>, data: Bytes) -> Self;

    // Wire codec (same layout as chia_protocol::Message)
    pub fn to_bytes(&self) -> Vec<u8>;
    pub fn from_bytes(bytes: &[u8]) -> Option<Self>;  // None on short/malformed buffer

    // Interop with stock Chia Message
    pub fn from_chia_message(msg: &Message) -> Self;                   // lossless
    pub fn try_into_chia_message(&self) -> Option<Message>;            // None if opcode ∉ ProtocolMessageTypes

    // Opcode-range predicates
    pub fn is_dig_extension(&self) -> bool;   // msg_type >= 200
    pub fn is_chia_standard(&self) -> bool;   // msg_type < 200
}

Inputs/outputs

Method	Input	Output	Failure mode
new	u8, Option<u16>, Bytes	DigMessage	infallible
to_bytes	&self	Vec<u8>	infallible
from_bytes	&[u8]	Option<DigMessage>	None if truncated
from_chia_message	&Message	DigMessage	infallible
try_into_chia_message	&self	Option<Message>	None if opcode not in Chia enum

---

DigMessageType — typed discriminants (200–219)

#[repr(u8)]
pub enum DigMessageType {
    NewAttestation = 200,
    NewCheckpointProposal = 201,
    NewCheckpointSignature = 202,
    RequestCheckpointSignatures = 203,
    RespondCheckpointSignatures = 204,
    RequestStatus = 205,
    RespondStatus = 206,
    NewCheckpointSubmission = 207,
    ValidatorAnnounce = 208,
    RequestBlockTransactions = 209,
    RespondBlockTransactions = 210,
    ReconciliationSketch = 211,
    ReconciliationResponse = 212,
    StemTransaction = 213,
    PlumtreeLazyAnnounce = 214,
    PlumtreePrune = 215,
    PlumtreeGraft = 216,
    PlumtreeRequestByHash = 217,
    RegisterPeer = 218,
    RegisterAck = 219,
}

impl DigMessageType {
    pub const MAX_ASSIGNED: u8 = 219;
    pub const ALL: [Self; 20];    // declaration order

    // TryFrom<u8> — Err(UnknownDigMessageType) when value ∉ 200..=219
}

// Serde: serializes/deserializes as raw u8 (not variant name)
impl Serialize for DigMessageType { ... }
impl<'de> Deserialize<'de> for DigMessageType { ... }
impl Display for DigMessageType { ... }  // "RegisterPeer(218)"

pub struct UnknownDigMessageType(pub u8);  // Error; Display + std::error::Error

Inputs/outputs

Conversion	Input	Output
as u8	variant	u8 in 200..=219
DigMessageType::try_from(u8)	u8	Result<Self, UnknownDigMessageType>
serde_json::to_string(&variant)	variant	"218" (stringified u8)
serde_json::from_str::<DigMessageType>	"218"	Ok(RegisterPeer) / Err if not 200–219

---

RegisterPeer — introducer registration request (opcode 218)

#[streamable]
pub struct RegisterPeer {
    pub ip: String,        // externally reachable IP or hostname
    pub port: u16,         // P2P listening port
    pub node_type: NodeType, // e.g. NodeType::FullNode
}

impl RegisterPeer {
    pub fn new(ip: String, port: u16, node_type: NodeType) -> Self;

    // Streamable trait — binary codec for payload body (not full wire message)
    fn to_bytes(&self) -> Result<Vec<u8>, chia_traits::Error>;
    fn from_bytes(bytes: &[u8]) -> Result<Self, chia_traits::Error>;

    // DigMessage wrappers (prepend opcode 218 + framing)
    pub fn to_dig_message(&self, id: Option<u16>) -> Result<DigMessage, chia_traits::Error>;
    pub fn from_dig_message(msg: &DigMessage) -> Option<Result<Self, chia_traits::Error>>;
    // from_dig_message returns None when msg.msg_type != 218
}

---

RegisterAck — introducer registration response (opcode 219)

#[streamable]
pub struct RegisterAck {
    pub success: bool,   // false == policy rejection (valid wire outcome)
}

impl RegisterAck {
    pub fn new(success: bool) -> Self;
    // Streamable: to_bytes / from_bytes
    pub fn to_dig_message(&self, id: Option<u16>) -> Result<DigMessage, chia_traits::Error>;
    pub fn from_dig_message(msg: &DigMessage) -> Option<Result<Self, chia_traits::Error>>;
    // from_dig_message returns None when msg.msg_type != 219
}

---

RequestPeersIntroducer / RespondPeersIntroducer — Chia-standard (opcodes 63/64)

#[streamable(message)]
pub struct RequestPeersIntroducer {}

#[streamable(message)]
pub struct RespondPeersIntroducer {
    pub peer_list: Vec<TimestampedPeerInfo>,
}

These use #[streamable(message)] because opcodes 63/64 exist in stock ProtocolMessageTypes. Compatible with Peer::request_infallible directly (no DigMessage wrapper needed).

---

Re-exports from Chia crates

From chia_protocol::* (full glob)

~100 wire types. Key items:

Category	Types
Framing	Message, Handshake, ProtocolMessageTypes, NodeType, Bytes, BytesImpl
Block	FullBlock, HeaderBlock, BlockRecord, Foliage, FoliageBlockData
Peer discovery	RequestPeers, RespondPeers, TimestampedPeerInfo
Mempool/tx	NewTransaction, RequestTransaction, RespondTransaction, MempoolItemsAdded
State/coins	Coin, CoinState, CoinSpend, RequestCoinState, CoinStateUpdate
Consensus/PoS	ProofOfSpace, NewSignagePointOrEndOfSubSlot, ChallengeChainSubSlot
Wallet protocol	NewPeakWallet, RegisterForCoinUpdates, RegisterForPhUpdates, SendTransaction
Fees	FeeEstimate, FeeEstimateGroup, FeeRate, RequestFeeEstimates

See chia-protocol docs for the full list.

From chia_sdk_client

// Always available
pub use chia_sdk_client::{
    ClientError,           // enum — TLS, handshake, io errors
    Network,               // mainnet/testnet selection
    Peer,                  // single-peer connection handle (send/request/receive)
    PeerOptions,           // builder config
    RateLimit,             // per-opcode rate limit entry
    RateLimiter,
    RateLimits,
    V2_RATE_LIMITS,        // static — V2 protocol defaults
    load_ssl_cert,         // load ChiaCertificate from disk
};

// Requires feature = "native-tls" or "rustls"
pub use chia_sdk_client::{Client, ClientState, Connector};

#[cfg(feature = "native-tls")]
pub use chia_sdk_client::create_native_tls_connector;

#[cfg(feature = "rustls")]
pub use chia_sdk_client::create_rustls_connector;

From chia_ssl

pub use chia_ssl::ChiaCertificate;   // { cert_pem: String, key_pem: String }

From chia_traits

pub use chia_traits::Streamable;     // trait — binary codec (to_bytes / from_bytes / hash)

From chia_streamable_macro

pub use chia_streamable_macro::streamable;   // #[streamable] / #[streamable(message)] proc macro

---

Encode / decode example

use dig_protocol::{DigMessage, DigMessageType, NodeType, RegisterPeer, RegisterAck};

// --- Encode outbound RegisterPeer ---
let rp = RegisterPeer::new("1.2.3.4".into(), 9444, NodeType::FullNode);
let wire: DigMessage = rp.to_dig_message(Some(1)).unwrap();
assert_eq!(wire.msg_type, DigMessageType::RegisterPeer as u8);  // 218
let bytes: Vec<u8> = wire.to_bytes();                            // send over socket

// --- Decode inbound frame ---
let msg: DigMessage = DigMessage::from_bytes(&bytes).expect("valid frame");

match DigMessageType::try_from(msg.msg_type) {
    Ok(DigMessageType::RegisterPeer) => {
        let decoded = RegisterPeer::from_dig_message(&msg).unwrap().unwrap();
        println!("peer {}:{}", decoded.ip, decoded.port);
    }
    Ok(DigMessageType::RegisterAck) => {
        let ack = RegisterAck::from_dig_message(&msg).unwrap().unwrap();
        println!("ack success={}", ack.success);
    }
    Ok(other)   => { /* dispatch other DIG opcode */ }
    Err(_)      => {
        // Not a DIG opcode — try as Chia Message
        if let Some(chia_msg) = msg.try_into_chia_message() {
            // dispatch Chia handler
        }
    }
}

---

Error types

Error	Source	Cause
UnknownDigMessageType(u8)	DigMessageType::try_from	Wire value not in 200..=219
chia_traits::Error	Streamable::to_bytes/from_bytes	Malformed payload
ClientError	chia_sdk_client	TLS, handshake, IO, protocol violations

DigMessage::from_bytes returns Option<DigMessage> (no error type) — None means truncated/malformed frame.

---

Invariants

• DigMessage::to_bytes output is binary-identical to Message::to_bytes for opcodes present in ProtocolMessageTypes.
• from_bytes(to_bytes(m)) == Some(m) for all valid DigMessage.
• DigMessageType as u8 ∈ 200..=219 for all variants; TryFrom<u8> is the inverse.
• Payload types 200–217 are defined by downstream crates; this crate only defines discriminants + framing.

---

License

Apache-2.0